Bu içerik lebihmurah mağazası tarafından hazırlanmıştır.
Package Include:
rn1 x Scriber Pen
rn1 x Engraver Tool
rn1 x Power Adapter (US Plug)
rn1 x Ruler
rn6 x Different Style Polishing Deads
rn6 x Sanding Rings
rn8 x Different Style Stencils
rn30 x Bits
rn(Includeing 10 pointed bits,5 round bits,4 jujube-shaped bits,11 flat bits)
rn
rnSpecification:
rnName: Electric Micro Engraver Pen
rnModel: D64991
rnInput Voltage: AC100V-240V 50~60Hz
rnOutput Power: 9V/1000mA
rnRPM(Single Speed): 20,000
rnVariable Speed: 3000~20,000
rnCollet Type Size: 2.4/3.2mm
rnSpring Chunk Type: 0.3~3.2mm
rn
rnApplications:
rn-Works for metal, glass, ceramic, plastic, wood, etc.
rn
rnFeatures:
rn-With scriber pen for extra fine, delicate strokes, great for marking or etching on jewelry, or other tiny objects, like rings, pendants, etc.
rn-Small & comfortable handgrip, letting you perform intricate work smoothly and effortlessly.
rn-Easy to control the tool, easily control the engraving/drawing path, makes smooth and clear strokes.
rn
rnOperation:
rn-This tool is design for carver, engrave, rout, grind, sharpen, sand, polish, drill and more.
rn-Unplug the tool form electrical outlet before loading a bit.
rn-Press shaft lock button. Use the collet wrench to loosen the collet nut. Insert the bit(not included), and tighten the collet securely. But avoid excess tightening of the collet nut and never use a damaged bit.
rn-There is an ON/OFF switch. When the switch is on, the tool runs at 3,000RPM. There is a switch indicator with another line on it. Slide the swithc to find the spped needed from 3000-20,000RPM. Slide the swithc to the black dot for complete stop.
rn-When finished, turn off the tool and unplug it.
rn
rnNote:
rn-Please allow 1-2CM differs due to manual measurement.
rn-Due to the different display and different light, the picture may not reflect the actual color of the item.
rn
rn
rn
rn
rn
rn
rn
rn